Bahrain improve safety with Raptor® 600
“Raptor® has been an excellent product to install and has already demonstrated improvement to the risks identiﬁed through the audit process.
When the product has been impacted, it is so quick to replace or even to repair. This means that the site is quickly and cost eﬀectively returned to the pre-incident condition. Highway Care has provided excellent support of this product.”
Denzil Monteiro Director, Al Ala Trading
Raptor® is used where light gantries are identiﬁed as being in substantial risk locations through the road design process or where a site safety audit has later identiﬁed the need. These are either sites with higher incident history, or exposed sites with high potential. Most sites require protection from multiple possible angles of impact.
Al Ala Trading has been installing the Raptor® on behalf of the Ministry of Works in Bahrain after recent audits.
The Ministry of Works audits identiﬁed multiple locations throughout Bahrain where there is a high risk of vehicle collision with road infrastructure. The speciﬁed improvements would need to:
Reduce risk of damage to infrastructure resulting in lower repair costs to incident sites and fewer road closures or subsequentworks.
Reduce occupant impact severity resulting in improved accident survival rates, reduced medical intervention and improving roadsafety.
Improve protection from alternative angles as a result of secondary collision events.
With minimal space available, a solution that would be slim and provide 360° protection is required. Gantry foundations are typically too wide to seat the protective crash cushion.
Conventional crash cushions would oﬀer protection, but not from multiple angles and, in some places, would not ﬁt well in the available space; creating obstructions for pedestrian traﬃc.
Raptor® is a non-redirective crash cushion safety device, purposely designed to reduce the impact severity of errant vehicles with any utility pole, gantry, tree and other single point hazards.
It has exceptional vehicular control and energy absorbing capabilities during end-on impacts or glancing blows. Due to its clever design, installation and repair can be done in under 30 minutes, minimising the need for traﬃc management requirement.
Extended foundations were easily created to site Raptor® at a suitable height that enabled product ﬁtment and ensured performance, while ensuring smooth passage for pedestrians.
A fully recyclable compact solution, Raptor® is suitable for protection of hazards within limited space, the slim side width of Raptor® enables ﬁtment and protection.
Highly reduces the severity of vehicle impacts against poles and trees. Meets NCHRP 350 test criteria (TL-1).
Additional testing has been carried out at 80 kph, demonstrating enhanced occupant protection.
Usable in places typically impossible to protect. Compact size and easy installation (under 30 minutes). Two sizes available to ﬁt multiple width hazard.
After a collision occurs, the non-impacted side can still be re-used.
Reduced Maintenance and Simple Installation
Zero maintenance, UV Stabilized, expected lifespan 25 years Smooth surfaces and geometry, suitable for vulnerable road users. No foundations are required.
Fully recyclable very low cost protection. Fire and vandal resistant.